Instrotech
  
Click on
Category
 Calibrators
   Hand-held
 Indicators
   Process
   Temperature
   Weighing
   Rate, Count, Time
   Loop powered
   Serial, Parallel
   Large Displays
   Options
   Integrators
   Selection Guide
 Transmitters
   Programmable
   Headmount
   Alarm Module
   Scalable
   Isolators
   Displacement
   Pressure
   Selection Guide
 Weighing
   Indicators
   Belt Weighers
   Transmitters
   Accessories
 Load Cells
   Single-ended Beam
   Double-ended Beam
   Single Point
   Universal S-type
   Compression
   Level or Volume
 Leak Detection
   Acoustic
 Rally Timing
   GPS Clock
 Tank Level Systems
   Water, Diesel, Foam
 Switches
   Temperature
 Radio modem
   Transceiver

Product Group: Calibrators
Product Category: Hand-held
Product Name: Load cell calibrator
Product Code: Calog-LC
Brochure: Click for pdf file in new window
1,028 Kb
Short Description: Load cell calibrator: load cell testing; insulation testing; weighing system testing; plus load cell and system simulation

Calog-LC data sheet
Calog-LC is a unique instrument for testing load cells, system measurement and simulation, load cell measurement and simulation and isolated retransmission.

Calog calibrators are hand-held units, quick and easy to set-up and use, have simple to follow graphic displays, plus on-board connection diagrams. All units have built-in rechargeable NiMH battery to ensure long field operation and 'fuel gauge' battery management technology which measures battery current and voltage to control the ideal fast and trickle charge rates. Calog units have the user-friendly 'key-per-digit' function to simplify numeric selection by means of five individual up/down keys.

Calog calibrators are supplied in a durable case with cables and mains charger with a non-slip rubber boot for the UL94 V-O flame retardant ABS plastic IP54 dust and splash proof housing. Local calibration facilities are available from Instrotech or an approved laboratory via the factory supplied calibration access code.

Load cell, amplifier and system testing and calibration may now be done using a single instrument.
    These menus:

    perform these functions:

  • Test Load Cell
  • wiring, zero balance, input and output impedance, balance - and balance +
  • Insulation Test
  • 50V test of screen and housing, 0 to 5000 Mohms
  • Measure mV
  • with excitation measure On or Off, measure mA On or Off
  • Measure mV and Mass
  • with excitation Measure or Set, units of mass, zero and span, measure mA On or Off
  • Source mV
  • with excitation measure On or Off, measure mA On or Off
  • Source mV and Mass
  • with excitation Measure or Set, mV, units of mass, zero and span, measure mA On or Off
  • Source Mass and mV
  • with excitation Measure or Set, units of mass, zero and span, mV, measure mA On or Off
  • Simulate mA
  • outputs isolated mA, 0 - 20mA
  • Simulate mA and Mass
  • isolated 0/4 - 20mA, units of mass, zero and span
  • Simulate Mass and mA
  • units of mass, isolated 0/4 - 20mA , zero and span
  • Settings
  • customises auto Off, backlighting, mains filter, battery info, sound On or Off, auto recall and splash screen
  • Help
  • shows wiring diagrams for the various Test, Measure, Source and Simulate functions
  • Convert
  • conversion tables from kg, g, t, ton, tonUK, lb, or oz to any other unit


      Features:

    • Small, rugged, handheld with a protective rubber cover
    • Graphic display of measured value, percent and battery status
    • Measure, source and simulate 0-30mA with 0.01% accuracy and 1 microamp resolution
    • Measure, source and simulate -4.5 to 35.000mV with 0.005% accuracy and 0.001V resolution
    • Measure 20V with 0.005% accuracy and 0.01V resolution
    • Measure 0 to 2000.0 ohms with 0.1 ohms resolution
    • Trend logging with programmable timebase
    • Displays values in mA and unist of mass
    • Programmable auto-off, restart at last setting and selectable display resolution
    • NiMH battery pack with 'fuel gauge' chip
    • User adjustable excitation voltage
    • Carry case, charger and test leads supplied as standard
    • 2 year guarantee, excluding batteries


 
Technical Specifications: Load Cell Calibrator

Load Cell Test
Detection of 4 or 6 wires and testing of 4 or 6 wires if the load cell is functioning correctly: zero balance, input ohms, output ohms, balance + ohms, and balance - ohms tests

Insulation Test
Bridge to shield, bridge to housing and shield to housing, displayed as 5000 MΩ or less with an accuracy of 1%

Analogue Input Ranges Impedance Resolution
0 to 2000 Ω 0.1 Ω
0 to 24 mA

Input Impedance 100 Ω

1 µA
0 to 12 V Input Impedance 500 Ω 1 mV
-4.5 to 35 mV Input Impedance 500 kΩ 11 µV

Analogue Output Ranges Impedance Resolution
0 to 24 mA Output Impedance 600 Ω 1 µA
-4.5 to 35 mV Output Impedance 500 Ω 1 µV


 
Data sheet