Instrotech Australia Pty Ltd

 +61 8 8337 8033
Product Group: Calibrators
Product Category: Hand-held
Product Name: Pressure calibrator
Product Code: CALOG-Pressure II
Brochure: Click for pdf file in new window
997 Kb
Short Description: Pressure and mA calibrator with plug-on pressure modules for -1 to 1000 bar ranges, 0.05% to 0.02% accuracy

Calog-Pressure data sheet

Pressure Calibrator and mA Calibration

CALOG-Pressure II

is a handheld calibrator with plug-on pressure sensors for any range up to 1000 bar. This instrument also has the functions to install and maintain all powered and non-powered milliamp loops. It is supplied with 1 plug-on pressure sensor with optional additional sensors available for the other pressure ranges specified below.

As a small, rugged unit with rubber protective boot, high precision and Li-ion long-lasting rechargeable battery pack, CALOG-Pressure II is ideal for industrial field calibration. Data may be logged to the removable SD card in CSV format, with user-selectable data fields and timebase. Logged data may also be retrieved via the USB port. CALOG calibrators are made by Instrotech and comply with CE and C-Tick EMC and EMI and Low Voltage directives.

Features:
  • Small, rugged, handheld with a protective rubber cover
  • Graphic display of measured value, percent and battery status
  • Measure, source and simulate 0-24 mA with 0.01% accuracy and 1 microamp resolution
  • Measure 32V with 0.005% accuracy and 1mV resolution
  • Continuity test function
  • Trend logging with programmable timebase
  • Displays values in mA and % or % and mA
  • Measure complete vacuum to 1000 bar pressure
  • Measures in bar, mbar, kPa, MPa, psi, m of H²O, in of H²O, ft of H²O, mm of Hg (torr), cm of Hg, in of Hg, kg per cm² and atmospheres
  • Contains a handy pressure conversion calculator
  • Programmable auto-off, restart at last setting and selectable display resolution
  • Data logging to removable SD card with time and date
  • USB port for access to logged data
  • Lithium-ion rechargeable battery pack with 'fuel gauge' chip
  • One pressure sensor included, more are optional
  • Carry case, battery charger, SD card, test leads and factory calibration certificate
  • 1 year guarantee, excluding batteries


 
Technical Specifications: Pressure Calibrator

Pressure Measurement Ranges   Accuracy Resolution
-1 to 1 bar, 0 to 3 / 10 / 30 / 100 / 300 / 700 bar Special ranges on request 0.05 % of FS Sensor dependent
 
Analogue Input Ranges Impedance Accuracy Resolution
0 to 24 mA Input Impedance ± 17 Ω, 250mA fused 0.01 % of FS 1 µA
0 to 32 V Input Impedance ±110 kΩ 0.005 % of FS 1 mV
Continuity with a < 100 Ω trigger and 1 mA excitation with visual and audible confirmation

Analogue Output Ranges Load Accuracy Resolution
0 to 24 mA Output load max 500 Ω 0.01 % of FS 1 µA


 
Calog-Pressure data sheet



Pressure calibrator data sheet




Calibration Instruments Digital Indicators Transmitters Weighing Electronics Load Cells
Load cell calibrator AC Amps / AC Volts AC Amps / AC Volts Amplifiers/transmitters Bolt-on transducer
Loop mA calibrator BCD/Binary/Gray code Density/Level/ Interface Axle weigher Compression
Pressure calibrator Frequency/Rate/Time Frequency / Speed Bag filler Double ended
Process calibrator Integrators mA/mV/V/Potentiometer Batch controller Single ended
Temperature calibrator Large digit displays Serial ASCII Belt weighers Single point
mA loop powered Temperature Tc/RTD Dynamometers Universal S-type
Process meters Indicators
Quadrature encoder Loss-in-weight
Temperature Tc/RTD Portable display
Totalisers / Counters Throughput weigher
Acoustic Leak Systems Car Rally GPS Timers Serial Radio Modems Soil Monitoring Tank Level Systems
Steam leak detection Rally clocks & trackers Serial Transceivers Sub-surface probes Diesel, Water, Foam
 




Content Managed By Web Whisperer Web Design Adelaide