Rail Mount Serial Data Logger

Model IQ830

is a rail mount Serial Data Logger for RS232 and RS485 inputs. Data is logged to the SD card at a minimum logging interval of 1 second in CSV format. Packaged in a space saving housing, this logger is quick and easy to install. LED's indicate receiving data, logging and SD card status.

Applications include interfacing with devices which output serial data, such as our

serial radio transceivers

weighing indicators

process indicators

serial indicators

load cell transmitters

The serial ASCII protocol, with 9600 baud, 8 data bits, No parity, 1 stop bit, is shown below. This example is from a weighing device:

<*> = Decimal 42
<AAA> (address) <SPACE> (Only transmitted if address > 0)
<HH:MM:SS><SPACE><DD/MM/YYYY><SPACE> (Optional field if realtime clock is selected = Time & Date)
<G/N><SPACE> = G=Gross, N=Net
<10 digits right justified, leading zero suppression, including decimal point and polarity>
<SPACE> = Decimal 32
<UNIT>= None=Unit not transmitted, g, kg, t, oz, lb, T, N
<CR> = Decimal 13
<LF> = Decimal 10

*Model:*	IQ830
Capacity	Normal and HC cards supported
Output file format	Comma Separated Variable (.CSV)
*Electrical:*
Supply Voltage	8 to 30VDC switch mode power supply with 33V over voltage and reverse voltage protection
Supply Current	Typically 45mA @ 12VDC
*General:*
Status LED's	Green LED
	Flashing: Receiving data
	Off: Not receiving data
	Orange LED
	Flashing: Logging to card
	Solid: Card error/write protect
	Off: Not logging to card
	Red LED
	Flashing: Power / Card present
	Solid: Power on
Serial interface	RS232 or RS485
*Environmental:*
Operating temperature	-10°C to 50°C (14°F to 122°F)
Storage temperature	40°C to 80°C (-40°F to 176°F)
Operating/storage humidity	<85% RH non-condensing
*Enclosure:*
Type	Rail mount
Dimensions	79.5 x 74 x 25mm
(L x H x D)	3.13” x 2.91” x 0.98”
Material	Nylon
Colour	Green