Transmitters for Weighing

6004 series weighing transmitter
Model 6004LC                            
Load Cell Display and Transmitter
6004 series weighing transmitter
Belt Weigher Display and Transmitter
6004 series weighing transmitter
Multi-Function Display and Transmitter
9004 series weighing transmitter
Smart Load Cell Transmitter, AC supply
9004 series weighing transmitter
Smart Load Cell Transmitter, DC supply
IQ300 weighing transmitter
  Wall mount Load Cell Display Transmitter
IQ810 weighing transmitter
  Rail mount Load Cell Display Transmitter

Model 6004LC
is a programmable field-mount isolated indicating load cell transmitter. This instrument incorporates a 60MHz 32-bit ARM7 micro-controller, including a real-time clock, data-logging, SD card slot, USB connectivity and a firmware upgrade boot-loader function.

The alphanumeric keypad allows users to enter tag numbers, calibration date, technician's name, and a host of other options. Relays may be configured as on/off, annunciators, fault or pulse counting outputs, with hysteresis and time delays. The 4 function buttons may be configured to toggle displays, to tare, or to change or accept alarms.

This unit incorporates PI control to allow the output to be used directly for load cell control or flow rate control. A special feature is the simulator, which allows analogue output and relay control to be simulated during system commissioning. A 15-point lineariser, min/max display hold, preset tare and auto-zero maintenance are all user selectable and programmable. The many functions, digital inputs and optional methods of setup are fully explained in the comprehensive operating manual.

Features:
  • Rugged and compact IP65 / NEMA 4 / UL Type 4 housing
  • Fully programmable from the front keypad
  • 10, 5 or 3.3V load cell excitation with sense feedback
  • 6-digit main display with user-selectable function
  • 20mm clear high-bright red LED digits
  • LCD backlit screen with 4 lines of user-selectable data
  • 4 user-selectable short-cut function keys
  • Isolated programmable analogue output as standard
  • PI control and 15-point lineariser as standard
  • USB port included as standard
  • 6 user-selectable digital inputs included as standard
  • Real-time clock with date included as standard
  • SD card slot for data-logging and firmware upgrades
  • 90-260V AC/DC or 10-30V DC auxiliary power supply
  • Optional 2, 4 or 6 change-over relay outputs
  • Optional RS232, RS485, USB or Ethernet interface
  • Optional GPS for vehicle-mounted applications
6004 weighing amplifier
Load cell transmitter, with isolated output, clock, alphanumeric keypad, LED display and 4-line LCD display

___________________________

.. more 6004 Series Weighing Amplifiers ..

Model 6004BW
Complete field-mount IP65 Belt Weigher

Model 6004MF
Multi-function IP65 Weight Transmitters:
  • Bag filler
  • Belt weigher
  • Axle weigher
  • Dynamometer
  • Batch weigher
  • Load cell transmitter
  • Throughput weigher
  • Loss-in-weight feeder

6004 Series weighing instruments
Transmitter, Belt Weigher, Dynamometer, Loss-in-Weight, Bag-Filler, Throughput Weigher, Batch Controller and Axle Weigher

___________________________

.. more 6004 Series Weighing Amplifiers ..

Model 6004BW
Complete field-mount IP65 Belt Weigher

Model 6004LC
Load cell IP65 indicator transmitter


Model 6004MF
is a unique multi-function weighing transmitter and indicator. The operating mode is user-selectable for a variety of weighing, packing and materials handling applications. This instrument incorporates the latest 60MHz 32-bit ARM7 micro-controller to handle the different application programs and includes an SD card firmware boot-loader upgrade function.

Applications:
  • Load cell transmitter
  • Belt weigher
  • Loss-in-weight feeder
  • Throughput weigher
  • Bag filler
  • Batch weigher
  • Dynamometer
  • Axle weigher

The alphanumeric keypad allows users to enter tag numbers, calibration date, technician's name, and a host of other options. Relays may be configured as on/off, annunciators, fault or pulse counting outputs, with hysteresis and time delays. The 4 function buttons may be configured to toggle displays or to change or accept alarms. This unit incorporates PI control to allow the output to be used directly for load cell control or flow rate control. A useful feature is the simulator, which allows belt speed, analogue output and relay control to be simulated during system commissioning. A 15-point lineariser, min/max display hold, preset tare and auto-zero maintenance are all user selectable and programmable. The many functions, digital inputs and optional methods of setup are fully explained in the comprehensive operating manual.

Features:
  • Rugged, compact, IP65 / NEMA 4 / UL Type 4 housing
  • Fully programmable from the front keypad
  • 10V, 5V and 3.3V load cell excitation with 6-wire sense
  • 6-digit main display with user-selectable function
  • 20mm clear high-bright red LED digits
  • LCD backlit screen with 4 lines of user-selectable data
  • 4 user-selectable short-cut function keys
  • Isolated programmable analogue output as standard
  • PI control and 15-point lineariser as standard
  • Power supply for shaft encoders or sensors included
  • USB port included as standard
  • 6 user-selectable digital inputs included as standard
  • Real-time clock with date included as standard
  • 1 solid-state and 5 change-over relays included
  • SD card slot for firmware and datalogging
  • RS232, RS485, USB or Ethernet interface options
  • Optional GPS for vehicle applications
  • 90-260V AC/DC or 10-30V DC auxiliary power supply

Model 9004 (AC)
and
Model 9244 (DC)
are miniature space saving 92 x 92 x 26 mm DIN rail mount Programmable Load Cell Transmitter. Configuration and field calibration is done via a computer using free user-friendly software available from this website, linked below.

This transmitter offers complete 3-way isolation between power supply, input and output and is designed for mV inputs from loadcells, strain gauges and strain gauge pressure transmitters. The stable bridge excitation voltage powers up to 4 load cells and includes sense feedback to compensate for line variations. The precision instrumentation op-amp front end circuit ensures high accuracy and stability. The adjustable digital damping feature allows for a stable output in noisy systems. This instrument meets CE and C-Tick EMC and EMI and Low Voltage directives. The analogue output is programmable for milliamps or volts. RS232 communications is standard with DIGIbus protocol.

Features:
  • DIN rail mount 92 x 92 x 26 mm enclosure
  • Fully programmable via a notebook or desktop PC
  • Low cost - high performance design
  • Complete 3-way isolation between power, input and output
  • Input levels user-programmable up to 3.00mV/V
  • Built-in user-programmable 16-point lineariser
  • 0-5, 1-5, 0-10V, 0-20mA or 4-20mA programmable analogue output
  • RS232 serial communications standard with DIGIbus protocol
  • Optional RS485 communications
  • Wide ranging 95 to 265V auxiliary supply (9004)
  • Wide ranging 10 to 30VDC auxiliary supply (9244)
9004 Series weighing instruments
Isolated Load Cell transmitter for up to 4 load cells - mA, V, serial output - for AC or DC
SmartView PC software for 9000 Series Transmitters
Smartview software screen
Free SmartView PC Software

Options:
  • 3001-P: Two alarms setpoints with solid-state relays
  • 3002: RS485 communications capability
  • 3004-P: One alarm setpoint with solid-state relay

Order codes:
  • 9004 for 95-265 V AC/DC auxiliary supply
  • 9244 for 10-30 V DC auxiliary supply
Copyright © 1999-2017 Instrotech Australia Pty Ltd. All rights reserved.
E&OE. Pricing and Availability may be subject to change without notice.